Usulan penerapan metode taguchi dalam rangka meningkatkan kualitas pada proses produksi gelas plastik di PT Trisno Dwijaya Plastisindo
Penerbit : FTI - Usakti
Kota Terbit : Jakarta
Tahun Terbit : 2003
Pembimbing 1 : Dorina Hetharia
Subyek : Taguchi methods (Quality control);Industrial companies;production process;materials handling
Kata Kunci : taguchi method, quality, production process, plastic cups, PT Trisno Dwijaya Plastisindo
Status Posting : Published
Status : Tidak Lengkap
| No. | Nama File | Hal. | Link |
|---|---|---|---|
| 1. | 2004_TA_STI_06399356_Halaman-Judul.pdf | ||
| 2. | 2004_TA_STI_06399356_Lembar-Pengesahan.pdf | ||
| 3. | 2004_TA_STI_06399356_Bab-1_Pendahuluan.pdf | ||
| 4. | 2004_TA_STI_06399356_Bab-2_Landasan-Teori.pdf |
|
|
| 5. | 2004_TA_STI_06399356_Bab-3_Metodologi-Penelitian.pdf |
|
|
| 6. | 2004_TA_STI_06399356_Bab-4_Pengumpulan-dan-Pengolahan-Data.pdf |
|
|
| 7. | 2004_TA_STI_06399356_Bab-5_Analisa-Data.pdf |
|
|
| 8. | 2004_TA_STI_06399356_Bab-6_Kesimpulan-dan-Saran.pdf | ||
| 9. | 2004_TA_STI_06399356_Daftar-Pustaka.pdf | ||
| 10. | 2004_TA_STI_06399356_Lampiran.pdf |
|
P PT. Trisno Dwijaya Plastisindo adalah perusahaan yang bergerak di bidang industri plastik yang memproduksi produk-produk plastik peralatan rumah tangga. Perindustrian plastik yang berkembang dapat dilihat dari banyaknya persaingan yang ada dan perkembangan produk yang semalcin meningkat . Penelitian yang dilakukan di perusahaan ini bertujuan meningkatkan kapabilitas proses produksi yang acia,, sehingga dapat mengurangi biaya produksi. Penelitian dilakukan pada produlc' gela karena masih tingginya persentase cacat pada proses produksi yang dihasilkan sagfa mengakibatkan kerugiab baik dari faktor biaya, material dan waktu yang terbuang. Langkah awal dilakukan dengan mengumpulkan data yang diperlukan dalam pengolahan data kemudian mengevaluasi proses dengan penerapan proses pengendalian statistikal yang bertujuan untuk mengetahui keterkendalian dan kapabilitas proses produksi. Kemudian dilanjutkan dengan Metode Taguchi untuk mengetahui setting yang optimal. Setelah faktor-faktor teridentifikasi dilakukan percobaan konfirmasi untuk memastikan peningkatan setelah pelaksanaan Metode Taguchi. Berdasarkan basil evalnssi penerapan pengendalian proses statistikal didapatkan kapabilitas proses sebesar 0.608 yang berarti proses masih kurang baik. Kemudian untuk meningkatkan kapabilitas proses dilakukan percobaan dengan Metode Taguchi menggunakan 2 level. Berdasarkan brainstorming dengan pihak perusahaan didapatkan faktor-faktor yang diduga berpengaruh yaitu Cooling Time, Pressure, Temperature, Injection, Mold Speed, Nozzle Pressure and Komposisi Bahan. Karakterisitik kualitas yang diukur adalah jumlah produk cacat gelas plastik. Hasil yang didapat dari Metode Taguchi adalah faktor-faktor yang berpengaruh terhadap kemampuan proses dan level setting yang optimum. Setting-setting yang didapat dari basil perhitungan Metode Taguchi adalah Cooling Time (5dtk), Pressure (45bar), Temperature (210°C), Injection (50g), Mold Speed (120rpm), Nozzle Pressure (150MPa), Komposisi Bahan Asli (75%). Setelah penerapan setting optimum dilakukan, terjadi peningkatan kapabilitas proses menjadi 0.69 dan penghematan sebesar Rp 3.661.166,25 per bulan untuk proses produksi gelas plastik.
P PT. Trisno Dwijaya Plastisindo is a company operating in the plastics industry, specializing in the manufacture of plastic household products. The growth of the plastics industry is evidenced by intense competition and the continuous evolution of products. This study aims to enhance the production process capability at the company, thereby reducing production costs. The research focuses on the production of plastic cups, as the high defect rate leads to significant losses in terms of costs, materials, and wasted time. The initial phase involved data collection, followed by an evaluation of the production process using Statistical Process Control (SPC) to assess its stability and capability. Subsequently, the Taguchi Method was applied to determine optimal process settings. Once the key factors were identified, confirmation experiments were conducted to verify the improvements achieved through the Taguchi Method. The evaluation using SPC revealed a process capability index of 0.608, indicating that the process was not yet performing at an optimal level. To improve this, experiments were conducted using the Taguchi Method with two levels for each factor. Through brainstorming with the company, several factors were identified as potentially influential: cooling time, pressure, temperature, injection amount, mold speed, nozzle pressure, and material composition. The quality characteristic measured was the number of defective plastic cups. The Taguchi Method identified the factors affecting process capability and determined the optimal settings for each. The resulting optimal settings are: cooling time (5 seconds), pressure (45 bar), temperature (210°C), injection amount (50g), mold speed (120 rpm), nozzle pressure (150 MPa), and a 75% proportion of virgin (original) material. Following the implementation of these optimal settings, the process capability index improved to 0.69, resulting in cost savings of IDR 3,661,166.25 per month for the plastic cup production process.